- Operating parts | standard elements
- Clamping levers, tension levers, cam levers
- Grips, knobs
- Pull handles, tubular handles, recessed handles
- Handwheels, crank handles, position indicators
- Quarter-turn locks, edge protection profiles
- Hinges
- Swivel feet, levelling feet
- Tube connectors, profile connectors
- Telescopic slides
- Latches, snap locks, slam latches
- Toggle clamps, power clamps
- Clamping elements
- Spring plungers, indexing plungers, ball lock pins
- Spring plungers
- Indexing plunger
- K2047
Indexing plungers steel or stainless steel
with plastic eyelet grip
- K1502
Indexing plungers, stainless steel with plastic mushroom grip and remote actuation
- K2042
Bowden cable distributor
for indexing plungers with remote actuation
- K2116
Bowden cables
for indexing plungers with remote actuation
- K2023
Wire cables
with end piece
- K2024
Traction sleeves
with inner tube
- K2025
End sleeves
- K2026
Setscrews
- K2027
Screw nipples
locked with grub screw
- K1584
Indexing plungers, steel or stainless steel with plastic cam lever
- K2109
Indexing plunger, steel or stainless steel
short version with plastic cam lever
- K1744
Indexing plungers steel or stainless steel with plastic mushroom grip and status sensor, hardwired
- K1495
Indexing plungers, steel or stainless steel with status sensor and plastic mushroom grip
- K1845
Magnetic base
for WLAN antenna
- K1846
Extension cable
for WLAN antenna
- K0338
Indexing plungers, steel or stainless steel with plastic mushroom grip
- K1096
Indexing plungers, steel or stainless steel with plastic mushroom grip and thread lock
- K1149
Indexing plungers, steel with plastic mushroom grip and locked mark
- K1213
Indexing plungers, steel or stainless steel with plastic mushroom grip and lock
- K0630
Indexing plungers, steel or stainless steel with plastic mushroom grip and extended indexing pin
- K2000
Indexing plunger mini steel or stainless steel
with plastic mushroom grip
- K2001
Indexing plunger mini, die-cast zinc
with plastic mushroom grip and mounting flange
- K0631
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip
- K1097
Indexing plungers, steel or stainless steel, short version with plastic mushroom grip and thread lock
- K1698
Indexing plungers, stainless steel for Hygienic USIT® seal and shim washers, with stainless steel mushroom grip
- K0632
Indexing plungers, stainless steel with stainless steel mushroom grip
- K2194
Indexing plungers, stainless steel short version with stainless steel mushroom grip
- K0735
Indexing plungers, steel or stainless steel for thin-walled parts, with plastic mushroom grip
- K0339
Indexing plungers, steel or stainless steel with plastic mushroom grip and cap
- K0747
Indexing plungers ECO, steel or stainless steel, with plastic mushroom grip
- K0635
Indexing plungers, steel or stainless steel without collar, with stainless steel pull ring
- K0346
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip
- K0347
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip and cap
- K0347_L
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip and cap, no locking slot
- K0347_M
Indexing plungers, steel or stainless steel, smooth version without collar, with plastic mushroom grip and cap, with locking slot
- K0347_N
Indexing plungers, steel or stainless steel, smooth version without collar, with threaded pin
- K0636
Indexing plungers, steel or stainless steel, smooth version without collar, with stainless steel pull ring
- K1839
Positioning bushes, steel or stainless steel
with status sensor
- K1840
Positioning bushes, steel or stainless steel
for status sensor
- K1290
Positioning bushes
for indexing plungers
- K0665
Spacer rings stainless steel
- K2146
Fastening set steel or stainless steel
for thin-walled parts
- K0736
Bush, tapered, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and cylindrical indexing pin
- K0736
Bush, cylindrical, steel or stainless steel, for Premium indexing plunger
- K0736
Premium - Indexing plungers, steel or stainless steel with plastic mushroom grip and tapered indexing pin
- K1300
Indexing plungers, steel or stainless steel with plastic mushroom grip, rotation lock and lead-in chamfer
- K1124
Indexing plungers, steel or stainless steel with plastic T-grip
- K0359
Precision indexing plungers, steel with plastic spherical knob and tapered indexing pin
- K0360
Bush, tapered, steel, for precision indexing plunger
- K0361
Precision indexing plungers, steel with plastic spherical knob and cylindrical indexing pin
- K0362
Bush, cylindrical, steel, for precision indexing plunger
- K1833
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1834
Indexing plungers, steel with plastic twist knob and tapered indexing pin
- K1835
Bushing steel, tapered
- K1098
Indexing plungers ECO, steel or stainless steel with plastic mushroom grip and thread lock
- K0748
Indexing plungers ECO, steel or stainless steel, short version with plastic mushroom grip
- K0340
Indexing plungers, steel with draw hook
- K0341
Indexing plungers, steel or stainless steel with threaded pin
- K0342
Indexing plungers, steel or stainless steel with stainless steel pull ring
- K0343
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip
- K0633
Indexing plungers, steel or stainless steel, without collar, with plastic mushroom grip and extended indexing pin
- K0634
Indexing plungers, stainless steel, without collar, with stainless steel mushroom grip
- K0344
Indexing plungers, steel or stainless steel without collar, with plastic mushroom grip and cap
- K1116
Indexing plungers, steel or stainless steel, pneumatic
- K0344
Screw-in washer
- K0345
Indexing plungers, steel or stainless steel without collar, with threaded pin
- K1582
Indexing and clamping grips, steel with plastic star grip
- K1583
Indexing and clamping grips, steel with plastic star grip and optical lock indicator
- K0245
indexing plungers, steel with plastic five lobe grip
- Cam action indexing plunger
- Ball lock pins
- Locking pins
- Retaining cables, ball chains
- Support elements, locating elements, stop elements
- Machine and fixture components
- Joints
- Magnets
- Buffer elements
- Level indicators, screw plugs
- Scales, scale rings, level vials
- Material handling
- Tools, workshop supplies
- Hygiene Shield
- Clamping technology
- Special solutions
- Classic products
- Order number, changeover
|
|
|
K0347Indexing plungers, steel or stainless steel, smooth version... |
go back |
|
|
DescriptionMaterial:Steel version:
Indexing pin hardened:
Sleeve 1.0403 weldable.
Indexing pin grade 5.8.
Stainless steel version:
Indexing pin hardened:
Sleeve 1.4301 weldable.
Indexing pin 1.4034.
Indexing pin not hardened:
Sleeve 1.4301 weldable.
Indexing pin 1.4305.
Mushroom knob black grey thermoplastic. Version:Steel version:
Indexing pin hardened, ground, black oxidised.
Stainless steel version:
Indexing pin hardened, ground and bright.
Indexing pin not hardened, ground and bright.Note:Indexing plungers are used to prevent any change in locking position due to lateral forces. A new locking position can only be set after the pin has been manually disengaged.
Form M is recommended for applications where the indexing plungers should remain disengaged over an extended period and the pin prevented from springing back.
Special grips can be fitted on the projecting threaded pin of Form N. This pin is also suitable for actuating the indexing plunger e.g. automatically (program-controlled) with the aid of a pneumatic cylinder or remote controlled with Bowden cables.
If the indexing plunger is welded on, the sleeve should be tack welded so that the spring is not thermally damaged due to high temperatures.On request:Special versions.Drawing reference:Form L: non-lockout type
Form M: lockout type
Form N: with threaded pin DownloadHere is all the information as a PDF datasheet:
Are you looking for CAD data? These can be found directly in the product table.
|
Drawings (total overview) |
| Order No. | Form | Main
material | Surface finish
body | D | D1 | D3 | L | L1 | L4 | Travel
S | Fx30° | Spring force
initial pressure
F1 approx. N | Spring force
final pressure
F2 approx. N | CAD | Acc. | Price | Order |
|---|
| K0347.1105 | L | steel | hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 |  | | 6.55 € | | | K0347.1206 | L | steel | hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 7.27 € | | | K0347.1308 | L | steel | hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 9.37 € | | | K0347.1410 | L | steel | hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 14.37 € | | | K0347.01105 | L | stainless steel | hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 | | | 11.12 € | | | K0347.01206 | L | stainless steel | hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 12.67 € | | | K0347.01308 | L | stainless steel | hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 16.84 € | | | K0347.01410 | L | stainless steel | hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 26.62 € | | | K0347.11105 | L | stainless steel | not hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 | | | 11.12 € | | | K0347.11206 | L | stainless steel | not hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 12.67 € | | | K0347.11308 | L | stainless steel | not hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 16.84 € | | | K0347.11410 | L | stainless steel | not hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 26.62 € | | | K0347.2105 | M | steel | hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 | | | 8.41 € | | | K0347.2206 | M | steel | hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 9.31 € | | | K0347.2308 | M | steel | hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 11.00 € | | | K0347.2410 | M | steel | hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 16.84 € | | | K0347.02105 | M | stainless steel | hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 | | | 14.30 € | | | K0347.02206 | M | stainless steel | hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 16.25 € | | | K0347.02308 | M | stainless steel | hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 19.83 € | | | K0347.02410 | M | stainless steel | hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 31.24 € | | | K0347.12105 | M | stainless steel | not hardened | 5 | 12 | - | 47 | 24 | - | 5 | 1,3 | 5 | 12 | | | 14.30 € | | | K0347.12206 | M | stainless steel | not hardened | 6 | 14 | - | 56 | 28 | - | 6 | 1,8 | 6 | 14 | | | 16.25 € | | | K0347.12308 | M | stainless steel | not hardened | 8 | 18 | - | 74 | 36 | - | 8 | 2,3 | 15 | 35 | | | 19.83 € | | | K0347.12410 | M | stainless steel | not hardened | 10 | 22 | - | 80 | 40 | - | 10 | 2,8 | 15 | 34 | | | 31.24 € | | | K0347.3105 | N | steel | hardened | 5 | 12 | M4 | 37 | 24 | 8 | 5 | 1,3 | 5 | 12 | | | 6.10 € | | | K0347.3206 | N | steel | hardened | 6 | 14 | M6 | 43 | 28 | 9 | 6 | 1,8 | 6 | 14 | | | 6.72 € | | | K0347.3308 | N | steel | hardened | 8 | 18 | M8 | 56 | 36 | 12 | 8 | 2,3 | 15 | 35 | | | 8.32 € | | | K0347.3410 | N | steel | hardened | 10 | 22 | M8 | 62 | 40 | 12 | 10 | 2,8 | 15 | 34 | | | 12.84 € | | | K0347.03105 | N | stainless steel | hardened | 5 | 12 | M4 | 37 | 24 | 8 | 5 | 1,3 | 5 | 12 | | | 10.31 € | | | K0347.03206 | N | stainless steel | hardened | 6 | 14 | M6 | 43 | 28 | 9 | 6 | 1,8 | 6 | 14 | | | 11.75 € | | | K0347.03308 | N | stainless steel | hardened | 8 | 18 | M8 | 56 | 36 | 12 | 8 | 2,3 | 15 | 35 | | | 15.02 € | | | K0347.03410 | N | stainless steel | hardened | 10 | 22 | M8 | 62 | 40 | 12 | 10 | 2,8 | 15 | 34 | | | 23.69 € | | | K0347.13105 | N | stainless steel | not hardened | 5 | 12 | M4 | 37 | 24 | 8 | 5 | 1,3 | 5 | 12 | | | 10.31 € | | | K0347.13206 | N | stainless steel | not hardened | 6 | 14 | M6 | 43 | 28 | 9 | 6 | 1,8 | 6 | 14 | | | 11.75 € | | | K0347.13308 | N | stainless steel | not hardened | 8 | 18 | M8 | 56 | 36 | 12 | 8 | 2,3 | 15 | 35 | | | 15.02 € | | | K0347.13410 | N | stainless steel | not hardened | 10 | 22 | M8 | 62 | 40 | 12 | 10 | 2,8 | 15 | 34 | | | 23.69 € | |
Other items in this category |
|
| Availability Here you can check item's availability. |
|
